Ndustrial Instant Baby Food Flake Double Drum Dryer Active Dry Yeast

• Type: Pharmaceutical Packaging Machinery
• Finished Dosage Form: Granules
• Precision: High Precision
• Certification: ISO
• Voltage: 220V
• Computerized: Computerized
• Model NO.: HG
• Customized: Customized
• Condition: Used
• Warranty: >2 Year
• After-sales Service: on Line Technical Support
• Transport Package: Seaworth Packing
• Specification: 5-5000kg
• Trademark: ZHENGAN
• Origin: Changzhou
• HS Code: 8419399090
• Production Capacity: 4 Sets/Month

Product Description

Hi, I am Joanna
 

And now working for Changzhou ZHENXING Environmental Technology Engineering Co., Ltd.

I know you are looking for good-quality dryer equipment.
 

Any questions about the drum dryer feel free to contact me, I would like to offer you full technical support and online video service, it will help you to know about the full drying system very well.
 

So our company can be a good choice, WHY?

 

 

 

You may be interested in the following information:

• ^{Detail of equipment, instruments. Brands.}
• ^{Detail of the construction material.}
• ^{Detail of automation} 
• ^{Whether or not it includes assembly.}
• ^{Startup and guarantees.}
• ^{Process parameters.}
• ^{Percentage of product loss.}
• ^{Quality parameters of the final product.}
• ^{Recommended operating time between power line CIP ("Clean In Place").}
• ^{Information plans for civil works, indicating necessary dimensions and levels, loads on slabs and bases, etc.}
• ^{The layout of the installation.}
• ^{Instruction manual for operation and maintenance.}
• ^{List of spare parts.}
• 

Introduction

<sup>Drum dryers are used in the food industry for drying a variety of products, such as milk products, baby foods, breakfast cereal, fruit and vegetable pulp, mashed potatoes, cooked starch, and spent yeast.

In a drying operation, liquid, slurry, or puree material is applied as a thin layer onto the outer surface of revolving drums that are internally heated by steam. After about three-quarters of a revolution from the point of feeding, the product is dried and removed with a static scraper. Factors affecting the rate of drying and final moisture content are residence time on the drum; surface temperature and film thickness.

A drum dryer consists of one or two horizontally mounted hollow cylinder(s) made of high-grade cast iron or stainless steel, a supporting frame, a product feeding system, a scraper, and auxiliaries.

Typical structures of single and double drum dryers are shown in Fig. 1. The diameter of typical drums ranges from 0.5m to 6m and the length from 1m to 6m. In operation, steam at a temperature up to 200°C heats the inner surface of the drum. The moist material is uniformly applied in a thin layer (0.5mm-2 mm) onto the outer drum surface. Most of the moisture is removed at water boiling temperature. The residence time of the product on the drum ranges from a few seconds to dozens of seconds to reach final moisture contents of often less than 5% (wet basis) (Tang, et.al., 2003). The energy consumption in a drum dryer may range between 1.1 kg steams per kg of evaporated water and1.6 kg steam per kg of evaporated water, corresponding to energy efficiencies of about 60%-90% (Hall, 1986; Moore, 1995).</sup>


 

Equipment design conditions

_{Material and liquid conditions
Material Name: waste yeast
Water evaporation: about 5-500 Kg/h
Dry powder output: 5-500 Kg/h (depending on the proportion of material)
Liquid input amount: 500-1000 Kg/h
Liquid temperature: 20ºC (normal temperature)
Drying  temperature:150ºC
Heat source: steam or thermal oil}

 

<sub>Technical Parameter


Process conditions
Drying method: heating
Hot air contact method: Heat conduction.
Heat source and heating method: steam or thermal oil heating
Dust removal method: Two-stage cyclone 
Product collection method: conveyor screw</sub>

 

Installation and Commissioning and Training:

1. Buyers arrange installation and debugging by themselves under a manual book from the supplier.

2. If the buyer requires engineers from the seller's party, the buyer should arrange the following items:

(A)Within 30 days after the machines are delivered to the buyer's factory, the buyer shall inform the seller to arrange engineers to the buyer's factory for installation, commissioning, test, and training machine operators.

(B)The buyer should provide the engineers(1-2 person) the boarding and lodging, transportation during the engineer's stay in the buyer's country, and round trip air ticket and visa fee for the engineers. Besides, the buyer should pay the money as salary for one engineer per day.
Project



Company Information
ZHENXING was founded in 1993. We are specialized in the development and manufacturing of dryers, mixers, granulators, grinders, and etc. Our company has cooperated with a number of research institutions since 2007 and we have established the largest sludge drying equipment testing center in China. All Dryer is widely applied in all kinds of industrial fields.